How to Calculate Between cfm/in² and l/s/cm²

The cfm/in² to l/s/cm² and l/s/cm² to cfm/in² Calculator converts between cubic feet per minute per square inch (cfm/in²) and liters per second per square centimeter (l/s/cm²) for air velocity measurements. The formulas are:

Where:

• \( cfm/in^2 \): Cubic feet per minute per square inch, a unit of air velocity.
• \( l/s/cm^2 \): Liters per second per square centimeter, a unit of air velocity.

Select the conversion direction, enter the input value, and calculate the result.

Note: The conversion factor 0.07315 is derived from 1 cfm = 0.47194745 l/s and 1 in² = 6.4516 cm².

Using the cfm/in² and l/s/cm² Mutual Conversion Calculator

This calculator is useful for HVAC design, ventilation rates, and air flow analysis, supporting bidirectional conversions between imperial and metric units.

Select the direction (cfm/in² to l/s/cm² or l/s/cm² to cfm/in²), input the value. The calculator outputs the converted value.

Example 1: For a value of 1 cfm/in² to l/s/cm².

1. Direction: cfm/in² to l/s/cm²
2. Input: \( 1 \)
3. Calculation: \( l/s/cm^2 = 1 \times 0.07315 \approx 0.073 \)
4. Result: \( 0.073 \, \text{l/s/cm²} \)

Example 2: For a value of 0.073 l/s/cm² to cfm/in².

1. Direction: l/s/cm² to cfm/in²
2. Input: \( 0.073 \)
3. Calculation: \( cfm/in^2 = 0.073 / 0.07315 \approx 1 \)
4. Result: \( 1.000 \, \text{cfm/in²} \)

Use this tool for quick bidirectional conversions in engineering or environmental applications.

Common FAQ

Below are frequently asked questions about cfm/in² and l/s/cm² conversions:

• Q: What is cfm/in²?
  A: cfm/in² stands for cubic feet per minute per square inch, a unit measuring air velocity in imperial systems.
• Q: What is l/s/cm²?
  A: l/s/cm² stands for liters per second per square centimeter, a metric unit measuring air velocity.
• Q: Is the conversion always using 0.07315?
  A: Yes, this is the standard factor derived from base unit conversions.
• Q: How accurate is this calculator?
  A: It provides precise results based on the formulas, rounded to 3 decimal places.
• Q: Can negative values be used?
  A: No, input values must be positive; invalid inputs leave the result blank.